Electrochemistry application notes
A continuously expanding collection of articles to support your research.
LED Lights Calibration
in PV
Charge Extraction
in PV
Fuel Cells Part 3-characterization using EIS
in Fuel Cells
Fuel Cells Part 2 - Types of Fuel Cells
in Fuel Cells
Fuel Cells Part 1 - What is a Fuel Cell?
in Fuel Cells
How to model porous electrodes with transmission lines
in General
Ohmic IR Drop Part 3 - Measurement with EIS
in General
Measuring counter electrode with S2
in General
Measuring hydrogen permeation according to ASTM G148
in Corrosion
Measuring the potential at the counter electode with VIONIC powered by INTELLO
in Electrocatalysis
Determination of the T-dependent conductivity of a solid proton conductor
in Battery Materials
Fe(II)/(III) deeper study
in Electrocatalysis
High-Frequency EIS Study of a Solid Electrolyte with ECI10M module
in Battery Materials
Calculation of Cell Constants using the Autolab Microcell HC TSC70 and TSC1600
in Battery Materials
High Impedance Study of a Biofuel Precursor
in High Impedance
Oxygen Reduction Reaction with the Roatating Ring Disk Electrode
in Electrocatalysis
Different approaches for capacitance measurements
in (Super)cap
Automated Measurement of Temperature Dependent Ion-Conductivity
in Battery Materials
Spectroelectrochemical measurements
in General
Ohmic Drop Part 2 - Measurement
in General
Ohmic Drop Part 1 - Basic Principles
in General
Reference Electrodes and Their Usage
in General
Determining the corrosion rate with INTELLO
in Corrosion
Coulometric Reduction as per ASTM B825
in Corrosion
Electrochemical Frequency Modulation
in Corrosion
ASTM G100: Cyclic Galvanostaircase Polarization
in Corrosion
Electrochemical Corrosion Studies of Various Metals
in Corrosion
Stepwise dissolution measurement
in Coatings
Ctitical Pitting Temperature (CPT) as per ASTM G150
in Corrosion
Corrosion Part 5 - Corrosion Inhibitors
in Corrosion
Corrosion Part 4 - Equivalent Circuit Models
in Corrosion
Corrosion Part 1 - Basic Concepts
in Corrosion
Differential Capacity analysis (DCA) for battery research with INTELLO
in Battery Testing
EIS at different states of charge with INTELLO
in Battery Testing
Constant Current Constant voltage (CC-CV) cycling with INTELLO
in Battery Testing
Simultaneous EIS measurements of a Li-ion battery cathode and anode
in Battery Testing
Determination of the Through-Plane Tortuosity of Battery Electrodes by EIS in a symmetric Lithium-iron-phosphate cell
in Battery Materials
Investigation of the Solid Electrolyte Interface Structure and Kinetics
in Battery Materials
Determination of the binary diffusion coefficient of a battery electrolyte
in Battery Materials
Determination of the MacMullin number
in Battery Materials
Potentiostatic Intermittent Titration Technique (PITT)
in Battery Materials
Galvanostatic Intermittent Titration Technique (GITT)
in Battery Materials
Galvonostatic charge-discharge of a Li-ion battery with Autolab
in Battery Testing
